Voir la source de Station météo qui a le groove

{{Tuto Details
|Main_Picture=Station_m_t_o_qui_a_le_groove_IMG_20201210_165837_resized_20201210_045906951.jpg
|Licences=Attribution (CC-BY)
|Description=Station météo utilisant un capteur BME 280 et un servomoteur SG 90
|Disciplines scientifiques=Arduino
|Difficulty=Technical
|Duration=3
|Duration-type=hour(s)
}}
{{Introduction
|Introduction=<nowiki>#</nowiki>include "Seeed_BME280.h"

<nowiki>#</nowiki>include <Wire.h>

<nowiki>#</nowiki>include "SH1106Wire.h"

<nowiki>#</nowiki>include <ESP8266WiFi.h>

<nowiki>#</nowiki>include <ESPDash.h>

<nowiki>#</nowiki>include <ESPAsyncTCP.h>

<nowiki>#</nowiki>include <ESPAsyncWebServer.h>

<nowiki>#</nowiki>include <Servo.h>

BME280 bme280;

SH1106Wire display(0x3c, D2, D1);

AsyncWebServer server(80);

ESPDash dashboard(&server);

Card temperature(&dashboard, TEMPERATURE_CARD, "Temperature", "°C");

Card humidity(&dashboard, HUMIDITY_CARD, "Humidity", "%");

Card pressure(&dashboard, GENERIC_CARD, "Pression", "mB");

Servo myservo;

void setup()

{

  myservo.attach(D6);

  Serial.begin(9600);

  bme280.init();

  display.init();

  WiFi.softAP("mon resseau", "mot de passe");

  server.begin();

  WiFi.begin("SSID BOX", "mot de passe");

  Serial.print("Connection en cours");

  while (WiFi.status() != WL_CONNECTED) // tant que l'esp n'est pas connecté au réseau on attends

  {

   delay(500);

   Serial.print(".");

  }

   Serial.println();

   Serial.print("Connecté, 192.168.4.1 : ");

   Serial.println(WiFi.localIP()); // affichage de l'adresse IP

  }

void loop()

{

  float temp = bme280.getTemperature();

  Serial.println(temp);

  display.clear();

  display.drawString(0,0, String (temp));

 

  float Pressure = bme280.getPressure();

  Serial.println(Pressure);

  display.drawString(0,10, String (Pressure));

 

  int Altitude = bme280.calcAltitude(Pressure);

  Serial.println(Altitude);

  display.drawString(0,20, String (Altitude));

 

  int Humidity = bme280.getHumidity();

  Serial.println(Humidity);

  display.drawString(0,40, String (Humidity));

  display.drawString(0,30, "Humidity");

 

  display.display();

  delay(1000);

  temperature.update(temp);

  humidity.update(Humidity);

  pressure.update(Pressure);

  dashboard.sendUpdates();

  int temp_map = map(temp,5,25,0,180);

  myservo.write(temp_map);

  delay(3000);

}
}}
{{Materials
|ItemList={{ItemList
|Item=BME280
}}
|Prerequisites={{Prerequisites}}
}}
{{Tuto Step}}
{{Notes}}
{{Tuto Status
|Complete=Draft
}}